What size rotors are on the MK7 GTI Performance Pack?
PADS – On the GTi range – the MK6 and standard brake models of the MK7 featured 312mm rotors with four front pad variants, the GTi MK6 Performance package models including ‘R’ utilise a 345mm rotor and the GTi MK7 Performance package models including ‘R’ utilises a 340mm rotor. Mk5 / Mk6 Golf Platform 312mm Front Brake Discs.
What size rotors are on a MK7 Golf TSI?
USR1201 – EBC USR Series Front Slotted Brake Rotors (Pair) – Volkswagen Golf MK7 & Audi A3 8V 1. TSI. Diameter 288mm, Height 50mm, Thickness New 25mm, Thickness Min 23mm. The Volkswagen Golf MK7GTI has a range of different models with different disc sizes. The base model has 312mm front and solid 300mm rear discs. The performance pack, 40 years and facelift feature 340mm front and 310mm rear discs.
What is the MM of brake rotors?
Most brake rotors start with a thickness or width of between 10 – 30 mm, also known as its nominal thickness. The minimum thickness or minimum discard thickness refers to how thin a rotor can be before it’s considered dangerous. Any mechanic will tell you that it’s time to change your brake pads when the lining is in the 3 mm to 4 mm range. For context, the standard thickness of new brake linings is 12 mm. The first half of your brake pad’s lifespan is usually carefree. As it wears past 6 mm, though, listen for the sign that it’s time.A general rule of thumb is to have your brakes inspected by a mechanic regularly once they reach about 5mm in thickness. If the brake pads have reached the minimum thickness of 3-4 mm, they should get changed right away.Once the brake pads wear down to or below this minimum thickness, it is recommended to replace them. As a general guideline, many brake pads have a minimum thickness of around 3 to 4 millimeters (0. Worn brake pads can lead to reduced braking efficiency and compromised safety.This is the first time either set would be replaced. Would it make sense to change the brake fluid at the same time? A: New brakes pads are generally about 10 to 12 millimeters thick. At 3 millimeters, the brakes are just about worn out and should be replaced.
How to choose brake rotor size?
The first factor is the wheel size. Our common rotor sizes of 343mm, 355mm, and 380mm rotors, the minimum wheel diameter is 17, 18, and 19 respectively. Naturally most people want the largest rotor they can find, because it generally provides more braking torque and, frankly, looks better. Rotors: The All-Rounder Sweet spot between weight and stopping power. Handles most terrain — from long climbs to steep descents — without fading. More modulation than a 200mm rotor, but noticeably stronger than 160mm. The most common rotor size for modern trail and enduro bikes.
How do I find my brake size?
The bulletproof method is to actually measure the outside diameter of your rotors and then match it with the listed properties of the replacement. A good vendor should have the documentation on their nominal rotor sizes and types, and would commonly provide the values upon request or on their website. The size is typically stamped or engraved on the rotor’s edge, making it visible without removing the wheel. Or simply get the improper measurement tool, and measure outside diameter and thickness. Those 2 dimensions will tell you what parts you need.The best way to ensure you get the correct brake discs is to check the diameter of the brake discs already fitted. The diameter and thickness of the disc is illustrated below. To measure the diameter you may not have to remove the wheel, however it would make the measuring process easier.