VW POLO 1. E (02-09) BRITOIL FULLY SYNTHETIC ENGINE OIL 5W30. Although both have the same viscosity grade in cold weather, 5W-40 is thicker than 5W-30 at warmer temperatures. It’s also worth pointing out that: 5W-40 is the suggested oil for most diesel applications. Rarely (if ever) do vehicle manufacturers recommend putting 5W-40 oil in a gas-powered engine.W-40 is thicker at operating temperatures than 5W-30, which may reduce fuel efficiency and affect engine performance. In cold climates, 10W-40 might not flow as well during cold starts compared to 5W-30, potentially causing more engine wear.For 5w40 oil: In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.
Can I use 5W-40 in VW?
Redex 5W-40 is a fully synthetic motor oil that’s suitable for use in a range of engines, including Mercedes-Benz, VW, Renault, and Porsche models. Both petrol and diesel drivers can use 5W-40 oil, and it’s also great for fuel injected, multi-valved or turbo-charged engines. W30 will still flow at temperatures as low as -22°F, while 10W30 will only work until 0°F. W30 is also somewhat more versatile for any season due to its wider temperature spread. Nonetheless, both 5W30 and 10W30 are excellent oil options.While both oils offer similar protection in warm conditions, 0W-30 provides better cold-weather performance, making it ideal for colder climates. On the other hand, 5W-30 is slightly thicker at startup, which can be beneficial in moderate or warm environments, but not as beneficial for colder climates.W-40 oil flow can normally go down to -40℃, whereas 5W-30 oil flow can go down to -35℃. When it gets hot, 0W-40 oil shows better performance than 5W-30, with the ability to perform well up to +40℃. W-30 motor oil only flows normally up to +35℃.Whether you have a light-duty petrol or diesel engine, 5w30 is often the suggested motor oil to use because it flows more easily in winter temperatures.When the engine is running and hot, 5w40 and 10w40 have high viscosities and are equally effective in protecting against engine wear.
Can you use 5W-30 oil in a VW?
It should be fine. Multiple -30 oils are on the VW 50200/50500/50501 list. While they aren’t certified, they’re all up to the same viscosity standard so odds are it wouldn’t make a difference. The two engine oils are both grade five when they are cold, however 5W30 becomes 30 grade and 5W40 becomes 40 grade under operating temperatures. In summer months, when temperatures are higher, 5W40 has higher viscosity levels than 5W30 engine oil, which can contribute to uninterrupted functionality of the engine.Most of these oils will provide at least a 1- to 2-percent increase in fuel economy over using the next viscosity grade. You see a savings at the pump by switching from a 10W40 to a 5W30 because you are dropping a viscosity grade and will have less fluid friction.Engine Oil 5W-40, 5W-30 (All TEMPS) – If synthetic oil that meets the applicable Audi, Volkswagen oil quality standard with the recommended viscosity grade is not available in your area, be sure to use a viscosity grade suitable for the climate, season, and operating conditions that exist where the vehicle is used.You should always use the oil recommended by your vehicle’s manufacturer. However, 5w30 oil can function in temperatures as low as -30ºC and as high as 35ºC, making it an ideal choice if you drive your car in a place with relatively high seasonal temperature variations.Many European engine oils have a wider viscosity range, such as 5W-40, 0W-30, and 0W-40, which provide great performance in extreme weather conditions. To achieve these viscosity grades, premium base oils such as Group III and Group IV (PAO) are needed.
Can I use 5W30 instead of 0w20?
Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine. Thus, always refer to the manufacturer’s recommendation while your vehicle is under warranty. W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go. Since 5W-30 is thicker than 5W-20, it has a higher viscosity. In engines, that can mean greater protection because the lubrication layer is thicker, making it more effective for preventing metal-on-metal contact.For high mileage engines, 5w40’s slightly thicker consistency may help to reduce leaks.W20 can improve fuel economy due to lower viscosity, which reduces internal engine friction. Many modern cars in Lansing are built to run on it. W30 might slightly lower fuel efficiency but provides better engine wear protection.However, thicker oil, such as 5W30, provides better protection at higher temperatures by maintaining a stronger film over engine parts, crucial in hotter climates or under heavy engine loads.
Can I use 5W-40 instead of 5W30?
Conclusion. In the event of an emergency, it is possible to substitute 5w40 for 5w30 and vice versa. However, it is advisable to adhere to the recommendations of the vehicle manufacturer. The oil weight was selected by the manufacturer to optimise fuel efficiency and protection at different temperatures. Fuel Economy: 5W30 Saves More Fuel 5W40: Higher viscosity increases internal engine friction, slightly raising fuel consumption. However, it improves sealing performance in older engines, reducing oil burning.Can You Switch Between 5W30 and 5W20? Only if your vehicle manufacturer allows it. Switching to a thicker oil like 5W30 in a car designed for 5W20 may reduce fuel efficiency and increase engine pressure.W20 is a thinner oil designed for extremely cold winter climates, whereas 5W30 is slightly thicker and appropriate for warmer operating temperature conditions, providing a balance between cold starts and sustaining a protective lubricating film.Technically, yes. Both oils share the same winter rating (“5W”), so the cold-start performance won’t change much. However, 5W40 is thicker at high temperatures, which could slightly alter performance.
Can you put 5W-30 in a VW Polo?
For most VW Polo models, 5W-30 synthetic oil provides optimal year-round protection in moderate climates. Recommended Engine Oils for Modern Volkswagen Models Recommended Oil: 5W-30 for turbocharged engines; 0W-20 for non-turbocharged models, meeting VW 502. VW 508.W-40 motor oil is suitable for both gasoline and diesel engines, making it a versatile choice for a wide range of vehicles, including passenger cars, SUVs, trucks, and vans.While we always recommend checking your owner’s manual for this information, most Volkswagen Passat models use 5W-30, 5W-40, or 0W-40 full synthetic oil.For 5w40 oil: In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.