What is the AdBlue warning on a Peugeot 308?

What is the AdBlue warning on a Peugeot 308?

If you encounter the Check AdBlue System warning in models like Peugeot 3008, 5008, 308, 508, 2008, Partner, or Expert, this usually indicates an issue with the vehicle’s emissions control system. The most common cause of this warning is low AdBlue levels. Dear customer, the UREA warning light on your Peugeot 308 indicates that the level of AdBlue fluid, which is used to reduce emissions, is low. You should refill the AdBlue fluid as soon as possible.

Does a Peugeot 308 need AdBlue?

The urea is in fact AdBlue, a special substance used by Peugeot’s BlueHDi diesel engines to reduce harmful nitrous oxide emissions. A quick flick through the 308’s handbook revealed that the car needed to be refilled with AdBlue every 12,500 miles. Trouble is, Peugeot recommends 20,000-mile service intervals. Dear customer, the UREA warning light on your Peugeot 308 indicates that the level of AdBlue fluid, which is used to reduce emissions, is low. You should refill the AdBlue fluid as soon as possible. It is usually located in the trunk, under the carpet.

Is it safe to drive with an AdBlue warning?

You should never allow your car to run out of AdBlue. If it does, the engine will go into ‘limp’ mode, drastically reducing power to keep NOx emissions within legal limits. A warning will appear on the driver’s display, and you should refill the AdBlue tank as soon as possible. Overfilling the AdBlue tank can cause damage to the AdBlue system and can also cause harmful gases to be emitted from the exhaust. The AdBlue tank should be refilled to the maximum level indicated on the dashboard.AdBlueâ„¢ is not compatible with many materials so it can corrode the pipework and components in the fuel system. This can cost thousands of pound worth of damage, not to mention the loss of use of the vehicle until a professional gas drained the tank, flushed out the system and carried out all repairs.Never overfill the system, either. This situation can create a vacuum within the tank that prevents the AdBlue from being injected into the exhaust. Consequentially, the AdBlue light may remain illuminated after filling. The AdBlue pump and circuitry are located on top of the tank in some cars.No, the engine will not be damaged if you run out of AdBlueâ„¢. You can proceed to the next AdBlueâ„¢ distribution point or use your emergency supply at the next safe stop if you have this on board. However, engine performance could be affected until you fill up.Attach an anti-spill nozzle to the AdBlue® container. If you do not have an anti-spill nozzle to hand, remove the AdBlue® tank cap and place a funnel in the top of the reservoir. Slowly refill the AdBlue® tank until it is full. Some vehicles require a dashboard reset after a top-up to remove the AdBlue® warning light.

How to reset AdBlue warning Peugeot 308?

Manually Resetting the AdBlue Warning Light Restart the car : Simply restarting your vehicle after refilling the AdBlue tank may be enough to turn off the warning light. Perform a Driving Cycle : Sometimes, the warning light disappears after driving a certain distance or completing multiple trips. There could be several reasons why your AdBlue light is still on even after filling up the AdBlue tank. Some possible causes could be: AdBlue tank sensor issue: The AdBlue tank sensor may not be working properly, causing the system to think that the tank is empty, even though it’s full.When the AdBlue light remains on after refilling, the system may need a reset via the vehicle’s onboard diagnostics. Check the AdBlue tank sensor for faults or contamination. Ensure the correct AdBlue fluid was used and the tank cap is properly sealed.The problem might be due to a faulty sensor or a defective output from the AdBlue tank to the dosing unit. A common solution is replacing the tank, and it’s recommended to have the vehicle checked at a workshop.Manually Resetting the AdBlue Warning Light Restart the car : Simply restarting your vehicle after refilling the AdBlue tank may be enough to turn off the warning light. Perform a Driving Cycle : Sometimes, the warning light disappears after driving a certain distance or completing multiple trips.

Can you drive with an AdBlue warning light?

So, how long can you drive after the AdBlue warning? The answer depends on the make and model of your vehicle. Generally speaking, you should be able to drive for around 500-2000 miles after the warning light comes on. Most vehicles which require adblue will give you a warning when there’s about 2-3 litres left. Depending on the vehicle and how you drive it, this will give you about 1,200 to 1,500 mile range.So, how long can you drive after the AdBlue warning? The answer depends on the make and model of your vehicle. Generally speaking, you should be able to drive for around 500-2000 miles after the warning light comes on.Most vehicles which require adblue will give you a warning when there’s about 2-3 litres left. Depending on the vehicle and how you drive it, this will give you about 1,200 to 1,500 mile range.The white warning will appear when the remaining range of AdBlue® is approximately 1,500 miles, and is repeated every 62 miles until the range reaches 1,000 miles, at which point the warning turns amber.

Can you reset the AdBlue warning light?

One of the easiest DIY methods to reset your AdBlue warning involves just your ignition and accelerator. Turn the ignition to ON without starting the engine. Press and hold the gas pedal for 10–15 seconds—this signals the system to recalibrate. There could be several reasons why your AdBlue light is still on even after filling up the AdBlue tank. Some possible causes could be: AdBlue tank sensor issue: The AdBlue tank sensor may not be working properly, causing the system to think that the tank is empty, even though it’s full.Keep filling the tank with AdBlue until the warning light goes off. Ignite the engine and keep it running for a few minutes to detect the new level of AdBlue. Now, switch off the engine and restart to verify if the system has recognised the new volume of AdBlue.Refill the AdBlue tank : Use an AdBlue fluid approved by the manufacturer (available at service stations, garages, etc. Restart the car : Simply restarting your vehicle after refilling the AdBlue tank may be enough to turn off the warning light.Some possible causes could be: AdBlue tank sensor issue: The AdBlue tank sensor may not be working properly, causing the system to think that the tank is empty, even though it’s full. AdBlue contamination: If the AdBlue fluid you used was contaminated, it may have caused the AdBlue system to malfunction.

How many miles can I drive after an AdBlue warning?

Most vehicles which require adblue will give you a warning when there’s about 2-3 litres left. Depending on the vehicle and how you drive it, this will give you about 1,200 to 1,500 mile range. How Long Does it Last? The average distance that a full tank of AdBlue will last is 6,000 to 7,000 miles. Typically, 1 litre lasts for around 600 miles but your driving style may impact this. Since travelling between 6,000 and 7,000 miles will empty your tank, we recommend topping up every 5,000 miles just in case.The AdBlueâ„¢ tank will need to be refilled with a minimum of approximately 3-5 litres of AdBlueâ„¢ before the vehicle will start. However, it is not uncommon for some makes and models to require a full tank of AdBlueâ„¢, and some vehicles may also need the system purged and reset.AdBlue tank sensor issue: The AdBlue tank sensor may not be working properly, causing the system to think that the tank is empty, even though it’s full.Never overfill the system, either. This situation can create a vacuum within the tank that prevents the AdBlue from being injected into the exhaust. Consequentially, the AdBlue light may remain illuminated after filling. The AdBlue pump and circuitry are located on top of the tank in some cars.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top