Can I drive with an AdBlue warning light?
So, how long can you drive after the AdBlue warning? The answer depends on the make and model of your vehicle. Generally speaking, you should be able to drive for around 500-2000 miles after the warning light comes on. The white warning will appear when the remaining range of AdBlue® is approximately 1,500 miles, and is repeated every 62 miles until the range reaches 1,000 miles, at which point the warning turns amber.An amber recharge AdBlue® light means that action is required. Roadside assistance: 0330 1003 241. The amber warning will appear when the remaining range of AdBlue® is approximately 1,000 miles. This warning is repeated every 31 miles and is accompanied by an audible tone.Checking your AdBlue® level If your warning light is lit, it’s not something that needs immediate action as when it appears, this indicates you have around 1,500 miles to go before you run out, and some models will even display a countdown.
How to remove AdBlue warning?
A smart way to resolve this issue is to turn on your ignition switch, wait for 30 seconds, and let all your vehicle’s lights turn on. Now, switch off the ignition and again start your engine. If the warning light is on, drive your vehicle for a few miles. This may sort out any glitch present in the system. Fixing the Issue If you have identified the issue causing the Check Emission System warning light to come on, you’ll need to take steps to fix it. Depending on the problem, possible solutions may include replacing damaged components such as the oxygen sensor, catalytic converter, or a vacuum hose.
How to fix AdBlue engine warning light?
To reset the AdBlue, the only option is to visit a mechanic or a dealer to have it set back to 0. This is the sole method available. I have faced this issue frequently with diesel vehicles from Audi, VW, and Mercedes. It’s a standard procedure. Use the funnel and container to catch the fluid and make sure to dispose of the Adblue properly, as it can be harmful to the environment. After that, use the Adblue removal solution recommended by the vehicle manufacturer to flush the Adblue system components.Tips for AdBlue Resetting Keep filling the tank with AdBlue until the warning light goes off. Ignite the engine and keep it running for a few minutes to detect the new level of AdBlue. Now, switch off the engine and restart to verify if the system has recognised the new volume of AdBlue.Attach an anti-spill nozzle to the AdBlue® container. If you do not have an anti-spill nozzle to hand, remove the AdBlue® tank cap and place a funnel in the top of the reservoir. Slowly refill the AdBlue® tank until it is full. Some vehicles require a dashboard reset after a top-up to remove the AdBlue® warning light.As AdBlue is not compatible with any engine materials it can very quickly corrode all components and pipework within the engine. If this happens the entire fuel system will need to be replaced. You must contact a professional to drain the tank immediately and dispose of all contaminated fluid.
Can AdBlue be switched off?
In order to disable the AdBlue system in a diesel car, the engine control unit (ECU) must be modified. As a result, the car no longer needs AdBlue fluid to lower emissions. It runs like a regular diesel engine instead. However, it is strictly formulated for diesel engines equipped with Selective Catalytic Reduction (SCR) systems. If AdBlue is mistakenly added to a petrol engine, it can cause serious mechanical damage and costly repairs.Adblue is a fluid that is used in diesel cars to reduce emissions of nitrogen oxides. By removing Adblue from your car, you can improve its fuel economy and performance, as well as reduce its emissions. In addition, AdBlue removal can also help to prevent engine damage and extend the life of your car’s engine.AdBlue is commonly mistaken as a fuel additive when it is actually an exhaust fluid that should never be mixed with diesel. AdBlue has its own tank and is stored completely separately to your vehicle’s fuel. Adding AdBlue into your diesel fuel tank can cause thousands of pounds worth of damage.What happens if I runout of Adblue – is it okay to drive without it? If you run out of AdBlue while you’re driving, then the engine’s power and performance will be reduced to limit its emissions. Once you’ve stopped, you won’t be able to restart the engine if the AdBlue tank’s empty.It is recommended that AdBlue is added to your diesel engine every 10,000 miles or every 6 months, whichever comes first. In general, it is advised to check the AdBlue tank level every time you fill up with diesel. If the tank is low, refill it in order to ensure that your engine is running cleanly and efficiently.
Why is my AdBlue warning still on?
Some possible causes could be: AdBlue tank sensor issue: The AdBlue tank sensor may not be working properly, causing the system to think that the tank is empty, even though it’s full. AdBlue contamination: If the AdBlue fluid you used was contaminated, it may have caused the AdBlue system to malfunction. If you are not sure where it is, check your owner’s manual. Attach an anti-spill nozzle to the AdBlue® container. If you do not have an anti-spill nozzle to hand, remove the AdBlue® tank cap and place a funnel in the top of the reservoir.Tips for AdBlue Resetting Keep filling the tank with AdBlue until the warning light goes off. Ignite the engine and keep it running for a few minutes to detect the new level of AdBlue. Now, switch off the engine and restart to verify if the system has recognised the new volume of AdBlue.Some possible causes could be: AdBlue tank sensor issue: The AdBlue tank sensor may not be working properly, causing the system to think that the tank is empty, even though it’s full. AdBlue contamination: If the AdBlue fluid you used was contaminated, it may have caused the AdBlue system to malfunction.Tips for AdBlue Resetting Keep filling the tank with AdBlue until the warning light goes off. Ignite the engine and keep it running for a few minutes to detect the new level of AdBlue. Now, switch off the engine and restart to verify if the system has recognised the new volume of AdBlue.
Can I add AdBlue myself?
You can refill the Adblue tank yourself. Typically, you’ll find an easily accessible AdBlue filler cap right next to the diesel filler cap. Simply unscrew the cap and pour in the AdBlue solution. AdBlue™ is not compatible with many materials so it can corrode the pipework and components in the fuel system. This can cost thousands of pound worth of damage, not to mention the loss of use of the vehicle until a professional gas drained the tank, flushed out the system and carried out all repairs.Important: AdBlue gets its own tank which is identified by a blue cap. Do not try to put AdBlue directly into your fuel tank. If your AdBlue level is low, a notification will appear in your vehicle’s information cluster display, and a warning light will illuminate on your dashboard.A common mistake that some vehicle owners make is accidentally adding AdBlue to the diesel fuel tank. This can cause serious damage to the fuel system and the engine. AdBlue is not designed to be mixed with diesel fuel, and doing so can lead to corrosion of the fuel injectors, pumps, and other fuel-related components.AdBlue added to fuel tank, but engine not started If necessary, flush the tank with clean fuel to ensure the interior is clean and the AdBlue has been removed. Fill the tank with fresh fuel and add 2 bottles of Wynn’s Total Action Treatment. Replace the fuel filter.